 |
| Place of Origin: | China |
| Brand Name: | OEM |
| Certification: | CE;ISO |
| Minimum Order Quantity: | Negotiable |
|---|---|
| Price: | Negotiable |
| Packaging Details: | Stardard Export Packing By carton |
| Delivery Time: | 5-10days |
| Payment Terms: | L/C, T/T, Western Union |
| Supply Ability: | 20,000 pcs per month |
| Type: | Pressure Sensor | Usage: | Industrial Usage |
|---|---|---|---|
| Place Of Origin: | Shaanxi, China(mainland) | Power Supply: | 12-24VDC (10-30VDC) |
| Output: | 12-36VDC/24VDC | Setting Distance: | 0-1.4mm, 0-2.8mm, 0-5.6mm... |
| Control Output: | Max.200ma | Accuracy: | 0.1%FS; 0.2%FS; 0.5 %FS |
| Media: | Gas, Air, Liquids, Weak Corrosive | Certificate: | ISO9001-2008 |
| Highlight: | Oil Filled water pressure transmitter,24VDC electronic water pressure sensor,100MPa waterproof pressure transducer |
||
Oil Filled Waterproof Pressure Transducer
Introduction
waterproof pressure transducer is an isolated oil - filled pressure sensor core with high performance, low cost and small volume. It uses MEMS Silicon chip. Manufacturing of each sensor is a process with strict aging, screening and testing to ensure the excellent quality and high reliability.
This product has high anti-overload capacity and wide temperature range, it is widely used in automobiles, loading machinery, pumps, air conditioning and other occasions where have high requirements on small size and cost-effective.
Feature
Ø Measuring range: -100kPa…0kPa~10kPa…100MPa
Ø Wide temperature compensation: -10℃~+80℃
Ø Imported chip, Laser trimming
Ø SS 316L φ19mm*11.5mm
Application
Ø Pressure measurement of automobile engine oil
Ø Engineering machinery, water pumps, equipment
Ø Industrial process control
Ø Urban water supply system
Outline Construction:(Unit: mm)
Specification
|
Construction Condition |
|
|
Diaphragm material |
SS 316L |
|
Housing material |
SS 316L |
|
Pin Wire |
Kovar/100mm silicone rubber wire |
|
Back pressure tube |
SS 316L (gauge and negative pressure only) |
|
Seal ring |
Nitrile rubber |
|
Electrical Condition |
|
|
Power supply |
≤2.0mA DC |
|
Impedance input |
3kΩ~6kΩ |
|
Impedance output |
3kΩ~6kΩ |
|
Response |
(10%~90%):<1ms |
|
Insulation resistance |
100MΩ,100V DC |
|
Overpressure |
2 times FS |
|
Environmental Condition |
|
|
Media applicability |
Fluid which has no corrosion on stainless steel and nitrile rubber |
|
Shock |
No change at 10gRMS,(20~2000)Hz |
|
Impact |
100g,11ms |
|
Position |
Deviate 90° from any direction, zero change≤±0.05%FS |
|
Basic Condition |
|
|
Environment temperature |
(25±1)℃ |
|
Humidity |
(50%±10%)RH |
|
Atmospheric pressure |
(86~106) kPa |
|
Power supply |
(1.5±0.0015)mA DC |
Parameter
|
Item |
Min. |
Typ. |
Max. |
Units |
|
Linearity
|
|
±0.1 |
±0.2 |
%FS,BFSL |
|
Repeatability |
|
±0.05 |
±0.075 |
%FS |
|
Hysteresis |
|
±0.05 |
±0.075 |
%FS |
|
Zero output |
|
|
±2.0 |
mV DC |
|
FS output |
45 |
130 |
|
mV DC |
|
Compensated temp. range |
-10~80 |
℃ |
||
|
Working temp. range |
-40~125 |
℃ |
||
|
Storage temp. range |
-55~150 |
℃ |
||
|
Zero temp. error |
|
±0.75 |
±0.1 |
%FS, @25℃ |
|
Full temp. error |
|
±0.75 |
±0.1 |
%FS, @25℃ |
|
Long term stability error |
|
±0.2 |
|
%FS/year |
|
Note:1. The above performance indicators are tested under the benchmark conditions |
||||
|
2. The temperature range for temperature drift test is the compensation temperature range |
||||
