 |
| Place of Origin: | China |
| Brand Name: | OEM |
| Certification: | CE;ISO |
| Minimum Order Quantity: | Negotiable |
|---|---|
| Price: | Negotiable |
| Packaging Details: | Stardard Export Packing By carton |
| Delivery Time: | 5-10days |
| Payment Terms: | L/C, T/T, Western Union |
| Supply Ability: | 20,000 pcs per month |
| Product Name: | Low Cost Water Micro Differential Pressure Sensor/transducer | Pressure Range: | 0~10KPa~2MPa |
|---|---|---|---|
| Output Signal: | DC100±20 MV | Accuracy: | ±0.25%(typic)±0.5%(Max.) |
| Static Pressure: | ≤20MPa | Pressure Port: | M10*1 Or Customize |
| Compensate Temperature Range: | 0℃~70℃ | Operate Temperature Range: | -10℃~80℃ |
| Housing Material: | Stainless Steel : 1Cr18Ni9Ti | Diaphragm Material: | 316L |
| High Light: | 2MPa Electronic Pressure Transducer,2MPa Pressure Transmitter Sensor,Differential Pressure Sensor Transducer |
||
Description
Micro-differential pressure, The mail measurement element is silicon oil-filled sensor, which can transfer pressure to linearization voltage signal.
Feature
Application
|
Pressure range
|
0~10KPa~2MPa
|
|
Zero pressure output
|
<2 mV
|
|
Span pressure output
|
DC100±20 mV
|
|
Proof pressure of high pressure side
|
2X rated pressure
|
|
Proof pressure of low pressure side
|
1X rated pressure or 1MPa, whichever is less
|
|
Static pressure
|
≤20MPa
|
|
Accuracy
|
±0.25%(typic) ±0.5%(Max.)
|
|
Long stability
|
±0.3%F.S/year (typic) ±0.5% F.S/year(Max.)
|
|
Pressure Port
|
M10×1 or customize
|
|
Compensate temperature range
|
0℃~70℃
|
|
Operate temperature range
|
-10℃~80℃
|
|
Store temperature range
|
-40℃~100℃
|
|
Housing material
|
Stainless steel : 1Cr18Ni9Ti
|
|
Diaphragm material
|
316L
|
|
O-ring material
|
Fluororubber
|
|
Cable
|
Polyethylene
|
|
Insulation resistance
|
100MΩ,100VDC
|
|
Protection
|
IP65
|
Unit:mm
Ordering note
1. In order to ensure that the sensor can safe and reliable operate, you can installed three valves between the sensor and the measured point to ensure that the medium slow and evenly applied to the positive, negative pressure in the cavity of the differential pressure sensor
2. Suggest that level of small range differential pressure sensor installation.
3. Pay attention to the pressure range and the static pressure value of the differential sensor can meets the corresponding requirements of the measured differential pressure point.
4. It is strictly prohibited to negative pressure higher than positive pressure in the cavity
